LUVUL

Handmade stainless steel sinks

Every detail, engineered.

16-gauge 304 steel, a sloped Speedy Drain floor, R10 corners, straight walls and mute pads. cUPC certified.

Explore our sinksWhere to buy

Innovation at every level

A sink works harder than almost anything in your kitchen. So we engineered ours from the steel up.

Steel
16G

1.5 mm, type 304

Corners
R10

10 mm radius, wipes clean

Mute pads
90%+

of the outer surface covered

Certified
cUPC

North American plumbing codes

Find the sink that fits your cabinet.

Pick your sink base cabinet width. We match it to each model's minimum cabinet size.

Your sink base cabinet width

20 models fit a 36-inch cabinet, based on each model's minimum cabinet size.

See all 20 models

Two collections. One standard.

All models

14 models · 15–33 in

Vacker

Undermount, drop-in and farmhouse apron-front sinks for kitchens, bars and laundry rooms.

6 models · 25–33 in

Oskan

Workstation sinks with a ledge that holds the cutting board, colander and drying rack over the bowl.

Max+ packs

The whole kit comes in the box.

Our Max+ packs pair the sink with 8 or 9 fitted accessories. Contents vary by model; each product page lists exactly what's included.

Inside every LUVUL sink

Eight details you won't notice in the showroom. But you'll appreciate every day.

  1. 16gauge

    True 16-gauge steel

    Handmade from 1.5 mm, type 304 stainless steel, then finished in layers for a hard-wearing satin surface made to resist stains from coffee, wine and grease.

    • 1.5 mm
    • Type 304
    • 18/10 chrome-nickel
    • R10 corners

  2. Slopeto the drain

    Speedy Drain floor

    Flat bottoms let water pool and grime settle in the corners. Drain lines and a sloped floor guide water and food scraps straight to the drain.

    • Sloped bottom
    • Drain lines
    • No pooling corners

  3. 1:1top to bottom

    Same size top to bottom

    Some sinks angle their walls so they stack for shipping, which shrinks the bottom. LUVUL walls drop straight, so the bowl keeps its full footprint all the way down.

    • No inclined walls
    • Full-size bottom

  4. Moreroom in the bowl

    Room for the big pots

    Since the bottom is as big as the top, our bowls hold more: stockpots, pans and glasses side by side, with tight R10 corners that still wipe clean.

    • Straight walls
    • 10 mm corner radius

  5. 7in working depth

    A grid that sets the depth

    Every grid ships with both standard and long rubber feet. Just swap the standard grid feet with our 3 3/8-inch rubber feet and a 10-inch-deep sink becomes a 7-inch working depth.

    • 9/16 in standard feet
    • 3 3/8 in long feet
    • Stainless grid

  6. 90%+padded

    Quiet under the disposal

    Garbage disposals make most sinks rattle. Thick automotive-grade pads cover over 90% of the outer surface to absorb noise and vibration.

    • 2.5 mm mute pads
    • Rubber + aluminum foil
    • Non-toxic, VOC-free

  7. 3-in-1strainer

    Basket, stopper and lid

    A deep, removable 1.2 mm stainless basket catches debris before it reaches the pipes and doubles as a stopper. Thick gaskets seal the install.

    • 1.2 mm stainless
    • Fits 3 1/2 in openings
    • Model 417887

  8. 3tools over the bowl

    Oskan workstation

    Forget the clutter on the countertop. A built-in ledge holds the cutting board, colander and drying rack right over the bowl. Prep, rinse and dry without leaving the sink.

    • Premium Bamboo Cutting Board
    • Workstation Stainless Steel Colander
    • Roll-Up Drying-Cooling Rack Workstation

Homeowners

Buy a LUVUL sink

Order online or find a dealer near you.

Where to buy

Dealers · designers · builders

Built for the trade

CAD drawings for every model, UPC and pack details, and a direct line for projects and dealer accounts.

Open the trade page